Semiconductor regulator for the alternator 28V, type PH - 28V/1

The regulator for the alternator 28 V with minus regulation is a circuit made on the ceramic board and produced with SMT technology. The ceramic board is pluged in the metal case and sealed with the epoxy resin. The output with the flat hollow A 6,3 mm is made of the cable with the cross-section 0,75 mm2.

If the regulator doesn't work, it must bear the temperature +120°C for time 2 hours.

The regulator of the voltage is determined as a part of the power supply's system with alternators 28V, to 50 A. The lifetime of the regulator is 4000 hours. It doesn't practise by the type test.

The regulator has to pass the test of the durability for 2000 hours in the formation with the carbons and the alternator TPP 00009253. 14/91 type 443 113 516 660. This test is standard for review of the durability. The requirement for the lifetime is executed, when the alternator in the formation with the regulator passes the test of the durability.

Rated voltage [ V ]

Range of the working temperatures
-40°C to + 90°C

Max. actuating current [ A ]

Temperature coeficient of the regulation voltage
-2 to -8 mVK-1

Degree of coverage
IP 54 according ČSN EN 60 529

50 g

Dimension's [ mm ]

Regulation frequency
20 to 400 Hz


ELKOMP Kroměříž,
spol. s r. o.

Altýře 1471/1C
767 01 Kroměříž

Tel/Fax: +420 573 330 491


We are obliged to inform you, that we process all your personal data in accordance with applicable legislation, Personal Data Protection Act 101/2000 Coll., Act. No. 127/2005 Coll. on Electronic Comunications Act and Act No.480/2004 Coll. Regulation 2016/679 of the European Parliament and the Council on the protection of individuals with regrad to the processing of personal data and free movement of such data (GDPR). The addresses are stored and secured in our company. We use your email address only in the context of our mutual business relation.

čeština cz English en