Semiconductor regulator for the alternator 28V, type PH - 28V/3

The regulator is determined for the alternators 28V type 443 113 518 800, 801, they create with the accumulator battery 2x12V the charging set of the electrical equipement of the motor vehicles.

The regulator for the alternator 28 V with minus regulation is a circuit made on the ceramic board and produced with SMT technology. The ceramic board is pluged in the metal case and sealed with the epoxy resin. The output with the flat hollow A 6,3 mm is made of the cable with the cross-section 0,75 mm2.

The lifetime of the regulator is 4000 hours. It doesn't practise by the type test.

The regulator has to pass the test of the durability for 2000 hours in the formation with the carbons and the alternator TPP 00009253. 14/91 type 443 113 516 660. This test is standard for review of the durability. The requirement for the lifetime is executed, when the alternator in the formation with the regulator passes the test of the durability.

Rated voltage [ V ]
28

Range of the working temperatures
-40°C to + 90°C

Max. actuating current [ A ]
3.5

Temperature coeficient of the regulation voltage
-2 to -8 mVK-1

Degree of coverage
IP 54 according ČSN EN 60 529

Weight
50 g

Dimension's [ mm ]
---

Regulation frequency
20 to 400 Hz

foto_vyrobky107_01

ELKOMP Kroměříž,
spol. s r. o.


Altýře 1471/1C
767 01 Kroměříž

Tel/Fax: +420 573 330 491

e-mail: elkomp@elkomp.cz

Contact us


čeština cz English en